Smoothness of operation … with the beauty; strength of stainless steel …
The hinges are made from all 304 series stainless steel and the slide mechanism incorporates a concealed non-structural glass filled nylon sleeve for smoothness of operation. Most sizes are readily available and in stock.
Storm hinges are designed for applications with 5/8 inch or 3/4 inch typical stack height. Please refer to the details below for correct sizing information. Feel free to call our engineering department for sizing recommendations.
851 096 8046 26″ Storm Hinge, Inline *,**:
Maximum Vent Weight: 100kg/ 220 lbs.
Minimum Vent Height: 1270mm/50″
Maximum Vent Height: 2000mm/78″
Opening Angle: 20 degrees (+/- 2.5 degrees )
*Please note the 26″ Storm Hinges do not meet the AAMA 910 Blocked Corner Test.
**Should higher weight and taller capacities be needed please use the Storm Balanced 26″ Hinge.
The Storm Balanced 26″ Hinge will eventually replace the NON-blanced version.
This only regarding the 26″ version. All other verisons will remain unchanged.
Please contact Bronze Craft with any questions at 603 883 7747.
Shims are no longer available for storm hinges.
For hinges requiring a 45 degree opening angle, please contact Bronze Craft or call 603-883-7747.
- Available in stainless steel with a mill finish
Min Pack: 10 pr.
Note: Manufacturer’s literature is provided for informational purposes only.
Every effort is made to maintain up to date manufacturers literature, however our vendors reserve the right to revise product specifications as they see fit, without prior or formal notification.
For project specific requirements, please contact our engineering department.
In many cases product testing, by others, may be required to ensure performance expectations are met.
